HP — Control panel light messages

Table 15. Control panel light messages (continued) Message Possible causes Solutions Initialization/Job cancel . A printer initialization is taking place. If all lights blink for a half second or longer in a sequence: z The printing is initializing. z All previously sent print jobs are being deleted from the printer memory. z A cleaning page is printing. No action is necessary. Fatal error . The printer has a fatal error. All lights are on. 1. Turn the printer off and back on. 2. Unplug the printer for 5 minutes, plug it back in, and turn it on. 3. If the printer still has an error, press the G O button, and see table 16, “Fatal error secondary messages,” on page 145. Accessory error .

The printer has an accessory error. All lights are blinking. 1. Remove the DIMM and reseat it. 2. If the printer still has an error, replace the DIMM. 144 Chapter 6 - Troubleshooting ENWW