Parts removal order Use the following diagram to determine which parts must be removed before removing other parts: Pickup roller Separation pad Transfer roller Left side cover Formatter Back cover Right side cover Top cover Solenoid Fan assembly (Fuser) Control panel Front cover assembly Right plate assembly (Formatter) Pickup assembly ECU Paper lift plate assembly Pickup roller shaft Paper-feed assembly Motor Laser/scanner Left plate assembly Fuser assembly Output rollers E-label assembly (1300 series only) Note The fuser and the formatter are listed twice. The fuser must be removed to gain access to the right plate assembly.
To remove the fuser only, remove the left side, back, right side, and top covers. The formatter must be removed to gain access to the pickup assembly, the ECU, and the left plate assembly. To remove the formatter only, remove the left side cover. ENWW Removal and replacement strategy 77