Pneumatic Totalising Counter 6 or 8 Digit Panel Mount Pneumatic Totalising Counter 6 Digit Surface Mount QZ002 QZ003 Accessories, page 7. Accessories, page 7. Pneumatic totalising counters register incoming air pulses on a 6 or 8 digit display. The surface mount totalising counter registers incoming air pulses on a 6 digit display. A single connection to the count input port is all that is required to start counting. A single connection to the count input port is all that is required to start counting. Choose a resettable counter or a counter without reset. Pneumatic totalising counters are light yet durable; maintenance-free, designed for a tidy fast installation.
The counter is reset by a pulse to the reset port or by pressing the reset button. ATEX Versions Available ATEX Versions Available Pneumatic Preset Counter 3 or 5 Digit Adding Panel Mount Pneumatic Preset Counter 3 or 5 Digit Subtracting Panel Mount QZ000 QZ001 Accessories, page 7. Accessories, page 7. Pneumatic preset counters register pneumatic pulses of air on a mechanical display. Pneumatic preset counters register pneumatic pulses of air on a mechanical display. Adding versions have a two-line display. The original preset value and process value are always visible. Subtracting versions have a single-line display. The preset value reduces for each input pulse.
The counter emits an output on reaching zero. The counter starts from zero and counts up to a preset value. The counter emits an output on reaching the preset. ATEX Versions Available ATEX Versions Available 6 sales@impulseautomation.co.uk | www.impulseautomation.co.uk | +44 (0) 1264 364194 Technical information Pressure range: 2-8 bar Temperature range: 0°C +60°C Mounting: Panel mount Manual Reset: Front butot n reset Pneumatic reset: Pulse signal to port Y, min pulse length 180ms Operating medium: 5 micron filtered, non- lubricated compressed air Technical information Pressure range: 2-8 bar Temperature range: 0°C +60°C Mounting: Surface mount Manual Reset:
Top butot n reset Pneumatic reset: Pulse signal to port Y, min pulse length 180ms Operating Medium: 5 micron filtered, non- lubricated compressed air Description Order code 6 digit adding totalising counter 50.670 Ports M5 8 digit adding totalising counter non-resetat ble 50.650 Ports 4mm Push-in Description Order code 6 digit adding totalising counter 50.660 Ports M5 Technical information Pressure range: 2-8 bar Temperature range: 0°C +60°C Mounting: Panel mount Manual Reset: Front butot n reset Pneumatic Reset: Pulse signal to port Y, min pulse length 180ms Operating Medium: 5 micron filtered, non- lubricated compressed air Technical information Pressure range: 2-8 bar Temperature range:
0°C +60°C Mounting: Panel mount Manual Reset: Front butot n reset Pneumatic reset: Pulse signal to port Y, min pulse length 180ms Operating Medium: 5 micron filtered, non- lubricated compressed air Description Order code 3 digit adding pneumatic counter 50.695 5 digit adding pneumatic counter 50.680 Ports M5 3 digit adding pneumatic counter 50.700 5 digit adding pneumatic counter 50.750 Ports 4mm Push-in Description Order code 3 digit subtracting pneumatic counter 50.685 5 digit subtracting pneumatic counter 50.690 Ports M5