omron — Using the Import Wizard

Tags and the Project Database Importing an External Database Import Wizard The Import Wizard is a powerful tool that reduces engineering time during project development. Using the Import Wizard, you can import tags from different data sources directly to the project tags database. Depending on the data source, you can import not only the tag names, but also the communication interface (the link between the tags and the PLC addresses). When you click Import Wizard on the Home tab of the ribbon, an Import Database Wizard dialog displays to step you through the process of importing tags. There are three steps for importing tags from these data source types:

• InduSoft Web Studio Project Database • OPC Server Database • CSV Database • ODBC Database • RSLogix ™ 5000 CSV Database • PanelBuilder32 ™ Database • OMRON ™ CX Programmer Database • TwinCAT ™ PLC Database • PanelMate Plus ™ Database Step1: Select the Source Type Import Wizard Click the data Source Type, which is where the tags are being imported from. Click Next . Continue to the appropriate section for the instructions you need to complete the import database procedure:

• Importing from Other project databases • Importing from OPC Server Databases • Importing from CSV Databases • Importing from ODBC Databases • Importing from PanelBuilder32 Databases • Importing from RSLogix 5000 CSV Databases • Importing from OMRON CX Programmer Databases InduSoft Web Studio Page 133