omron — Pushbutton object

Screens and Graphics • Config button: Click to open the Configuration dialog, which allows you to specify style and state parameters for the pushbutton: Configuration dialog This dialog provides the following parameters: • Style combo-box: Click the combo-box button to select a pushbutton style ( Rectangle (default) or Rectangle with Indicator ). • Effect combo-box: Click to select a 3-D effect for the pushbutton. • Floating (default): Buttons resemble a flat object with a shadow • 3D : Buttons have beveled edges and appear to "depress" into the screen when pressed. You can use the Style and Effect parameters in combination to create four different buttons, as shown in the following figures:

• Align : Specify the alignment for the caption of the pushbutton. Pushbutton Styles • Button Color box: Click to specify a default color for the button area of a pushbutton object that includes an indicator and a faceplate. When the Color dialog displays, click on a color to select it, and close the dialog. • Legend Plate Color box: Click to specify or change a default color for the legend plate area of a pushbutton object that includes an indicator. When the Color dialog displays, click on a color to select it, and close the dialog. A legend plate encloses a button and indicator light. This field becomes inactive if the pushbutton Style does not include an indicator.

• Open and Closed areas: The following parameters are used to configure the appearance of a pushbutton object in its open and closed states. • Color box: Click to specify a default color for an indicator in each State . When the Color dialog displays, click on a color to select it, and close the dialog. If you selected a pushbutton style that does not include an indicator, you can use this field to specify a button color for each State . • Blink combo-box: Click to specify whether the color you specified in the Color box blinks and how fast it blinks for each state ( None (no blinking, default ), Slow , and Fast ).

If you set the color to blink, it alternates between the color specified in the Color box and the Legend Plate Color (if an indicator) or the Button Color (if a button). • Caption text box: Use this text box to enter the caption of the button. Alternatively, if the button style includes an indicator, the legend plate. You can include a tag by enclosing it in curly brackets (e.g., { tagname } ). • Fonts button: Click to open the Font dialog, which you can use to specify or change the message font characteristics for each state. Page 170 InduSoft Web Studio