Screens and Graphics Note: When the value of the property is "Read-only" (cannot by overwritten by your project), the Action field is automatically set to Get . • Scan : Defines the polling method to get values from the ActiveX propreties, according to the following table: Note: Some ActiveX controls are designed to send messages to their containers (e.g., your project) indicating that a property changed value and the new value should be read (Get) again. However, other ActiveX controls do not implement this algorithm. In this case, the only way to get the updated values of the ActiveX properties is to keep polling these values from the ActiveX control (Scan=Always).
Configuring Methods The Methods tab provides a grid with the following fields: Configuration Dialog – Methods Tab • Method : List all methods available from the ActiveX object. • Parameters : The tags configured in this field are associated with the parameters of the method of the corresponding ActiveX object. If the method does not support any parameter, the fixed text is displayed in the Parameters field. Otherwise, you can type the tags associated in the parameters of the ActiveX object. When the method has more than one parameter, you can type one tag for each parameter, separating them by a comma ( , ). For example, TagA , TagB , TagC .
When the method is executed, either the value of the tags are written to the parameters of the method (input parameters), or, after the method is executed, the ActiveX writes the value of the parameters to the tags (output parameters). Tip: When you click the Browse button ( ), it will display the list of parameters supported by the method, allowing you to associate one tag with each parameter. • Trigger : When the tag configured in this field changes value, the respective method of the ActiveX control is executed. • Return : The tag configured in this field receives the value returned by the method (if any).
InduSoft Web Studio Page 195 Scan Description No The value of the ActiveX property is read and written to the tag configured in the Tag/Expression field, only when the screen with the ActiveX object is open, and when the ActiveX object sends a message to IWS to update this tag. Always IWS keeps polling the value of the ActiveX property and updating the tag configured in the Tag/Expression field with this value.