omron — .NET Control object

Screens and Graphics Note: When the value of the property is "Read-only" (cannot by overwritten by your project), the Action field is automatically set to Get . • Scan : Defines the polling method to get values from the propreties. For .NET Components, all properties scan Always by default. That is, IWS keeps polling the value of the property and updating the tag configured in the Tag/Expression field with this value. Configuring Methods The Methods tab provides a grid with the following fields: Members Dialog – Methods tab • Method : Lists all methods available from the .NET Component. • Parameters : The tags configured in this field are associated with the corresponding method.

If the method does not support any parameter, then the fixed text is displayed. Otherwise, you can enter the tags that you want to associate with the parameter. When the method has more than one parameter, you can enter one tag for each parameter, separating them by a comma (,). For example, TagA , TagB , TagC . Tip: When you click the Browse button ( ), it will display the list of parameters supported by the method, allowing you to associate one tag with each parameter.

When the method is executed, either the value of the tags are written to the parameters of the method (input parameters), or, after the method is executed, the .NET Component writes the value of the parameters to the tags (output parameters). • Trigger : When the tag configured in this field changes value, the respective method of the .NET Component is executed. • Return : The tag configured in this field receives the value returned by the method (if any). InduSoft Web Studio Page 199 Action Description Set Write the value from the tag or expression configured in the Tag/Expression field into the property. Get+Set Executes both actions (Get and Set).

However, when opening a screen with the .NET Component, IWS executes the Get command before executing any Set command. That is, the tag configured in the Tag/Expression field is updated with the value of the property when IWS opens the screen where the .NET Component is configured. Set+Get Executes both actions (Get and Set). However, when opening a screen with the .NET Component, IWS executes the Set command before executing any Get command. That is, the property is updated with the value of the tag configured in the Tag/Expression field when IWS opens the screen where the .NET Component is configured.