omron — OPC .Net

Communication with Other Devices Configuring an OPC .NET Client connection to an OPC .NET server The OPC .NET Client task/worksheet is to communicate with any system that implements the OPC .NET Server protocol. About OPC .NET The OPC .NET Client task/worksheet uses the new OPC .NET communication protocol introduced by the OPC Foundation. According to the foundation: OPC .NET 3.0 (WCF) (formerly known as OPC Express Interface (Xi)) is the continued evolution of OPC Foundation native support for Microsoft platforms that previously included: the OPC Foundation Automation Wrapper for Visual Basic 6 and the OPC .NET 2.0 API for VB.NET and C#.

It bridges the gap between Microsoft.NET and the world of OPC Classic. In other words, OPC .NET is intended to be a new version of OPC that leverages Microsoft's latest technologies. For more information, go to the OPC Foundation website . Configuring a new OPC .NET server connection To configure a new connection to an OPC .NET server: 1. Do one of the following: • On the Insert tab of the ribbon, in the Communication group, click OPC Client and then select OPC .Net Connection from the drop-down list; or • In the Comm tab of the Project Explorer, right-click OPC .Net Connections and then click Insert on the shortcut menu. The OPC Server Connection dialog is displayed: 2.

In the Connection Name box, type a name for the connection. OPC Server Connection dialog This name will be displayed in the OPC .Net Connections folder in the Project Explorer, and it is the name you will look for when you configure the OPC .Net Client worksheet. 3. In the Discovery Server list, type or select the URL of the discovery server that publishes a list of OPC .NET servers on the network. If no discovery server appears to be available, click Refresh to scan the network again. Note: This feature requires that the Peer Name Resolution Protocol service be running on both the client station and and the discovery server.

PNRP has been built into Microsoft Windows since Windows XP Service Pack 2, so this shouldn't be a problem in most situations. Page 308 InduSoft Web Studio