Testing and Debugging Using Remote Tools Remote Database Spy You can use the Remote Database Spy tool (located in the Tools menu ) to monitor the Database Spy of an IWS project running on a remote computer. The project must have the Database Spy execution task enabled , and the remote computer must be in runtime . To use the Remote Database Spy tool: 1. On the Home tab of the ribbon, in the Remote Management group, click Database Spy . The Remote Computer dialog is displayed. 2. Enter the IP address of the remote computer, as shown below. Entering a Remote IP Note: The IP address 192.168.1.52 is only an example. Please verify the IP address of the computer to which you want to connect. 3.
Click OK to connect to the specified address. If the connection is good, then the Remote Database Spy window is displayed. Remote Database Spy Note: You cannot add or remove tags remotely; the Database Spy tag list must be configured on the remote computer itself. When you are done, click Close to disconnect from the remote computer. Remote LogWin You can use the Remote LogWin tool (located in the Tools menu ) to monitor the Output log (LogWin) of an IWS project running on a remote computer. The project must have the LogWin execution task enabled , and the remote computer must be in runtime . To use the Remote LogWin tool: 1.
On the Home tab of the ribbon, in the Remote Management group, click LogWin . The Remote Computer dialog is displayed. InduSoft Web Studio Page 357