Deploying as a Web Application ISSymbol Control Layer ISSymbol is a component designed by InduSoft that is able to display the screens created with IWS in the Web browser and exchange data (tag values and history data) with the TCP/IP server module of the project. On the Thin Client station, the Web browser (e.g., Internet Explorer) is the container that hosts the ISSymbol control. ISSymbol works as a control layer between the project and the Web browser — equivalent to the Java Virtual Machine for Java-based applications. This approach provides a high level of security because ISSymbol does not allow the project to access the operating system directly.
When the Web browser downloads the HTML page specified by the user, it checks for ISSymbol control registration on the current computer. If it does not find it, the browser attempts to download registration from the URL specified in the project settings ( Thin Client on the Project tab of the ribbon). The Web browser is not able to display the screens from the project if the ISSymbol control is not properly registered in the Thin Client station. Caution: Make sure your Web browser is enabled to download signed ActiveX controls, in order to download ISSymbol automatically. Otherwise, you will need to register ISSymbol manually in the Thin Client station.
Check your Web browser's documentation about security settings if you have questions about how to configure these settings. Manually Installing the ISSymbol Control You can also install the ISSymbol control manually in the Thin Client station. The procedure to install ISSymbol in each operating system is described below: Windows PC 1. Copy the following files… • […]\InduSoft Web Studio v7.0\Bin\ISSymbolReg.exe • […]\InduSoft Web Studio v7.0\Bin\ISSymbolVM.cab …into any directory of the Thin Client station. Make sure that both files are stored in the same directory. 2. Run ISSymbolReg.exe to register the ISSymbol control on the PC. Windows Embedded 1.
Determine the OS version and processor type of the Windows Embedded device, and then find the corresponding redistribution folder in the IWS program directory: […]\InduSoft Web Studio v7.0\Redist\ CE_version \ processor_type \Bin\ For example, for a MIPS IV processor running Windows CE 5.0 or later: […]\InduSoft Web Studio v7.0\Redist\WinCE 5.0\MIPSIV\Bin\ 2. From that directory, copy the following files… • IndHTTP.dll • IndVkStd.dll • ISSymbolCE.ocx …and one of the following Virtual Keyboard layouts… • VKEN.ini (for English) • VKGE.ini (for German) …into any directory in non-volatile memory on the Windows Embedded device. Make sure that all files are stored in the same directory. 3.
At the Windows command prompt, execute the following command: regsvrce.exe "\ ISSymbol_directory \ISSymbolCE.ocx" For example: regsvrce.exe "\Storage Card\ISSymbolCE.ocx" InduSoft Web Studio Page 371