Deploying as a Web Application Configuring the Data Server IWS has a couple dialoges that are used for configuration of the Data Server and the Web Server configuration to be used. This information is embedded in the HTML web pages that correspond the screens. The Data Server is part of the IWS runtime project and uses the TCP/IP Server module. There are three (3) basic steps to this configuration: Step 1: Web Settings dialog configuration 1. On the Project tab of the ribbon, in the Web group, click Thin Client . 2. In the Data Server IP Address field, type the IP address of the PC where the runtime project will reside. 3.
Check the checkboxes for Auto Screen Scaling, Enable File Compression and Enable Tooltips. If you want to disable the Web Client from issuing commands to the Server, check the Disable Remote Client Commands checkbox. 4. If the Web Client is to use a Virtual Keyboard, check the Virtual Keyboard checkbox and any additional settings for the Virtual Keyboard at the Thin Client. 5. By clicking on the Advanced button, you can define a backup URL (i.e., backup Website for web pages) and a Secondary Data Server IP address. This is for a redundant Web Server and/or a redundant Data Server, respectively. Web Tunneling can also be enabled in this dialog.
The URL for the ISSymbol OCX can also be defined if it is not found on the Web Server. InduSoft Web Studio Page 377