omron — Implementing Security

Deploying as a Web Application in the Server station by clicking IP Security in the project settings ( Thin Client on the Project tab of the ribbon): IP Security dialog Access allowed by IP address Method 4: Encrypted Communications (SSL) By enabling the Web Tunneling Gateway (WTG), you can enable all communications between the Data Server + Web Server and the Thin Client to be encrypted using RC6, a highly-secure 128-bit encryption standard. To use SSL, you must do the following: 1. Click Advanced in the project settings ( Thin Client on the Project tab of the ribbon). Select (check) the Web Tunneling Gateway Enabled option.

Click on the SSL radio button and be sure the SSL port is set to 443. Click OK . Project Settings — Web — Advanced dialog 2. In your Web Server, be sure SSL capabilities are enabled and that a SSL Certificate of Authentication is present. 3. Be sure SSL is enabled in the Web Client 4. Set up all other Web configurations to support the WTG. Method 5: VPN A VPN is a Virtual Private Network. It is called virtual since it really uses the public Internet to transport data from one computer to another. But since this network is encrypted and uses other security mechanisms enabled by the ISP, is it a very secure Private Network.

While VPN's are inherently secure, they are more costly that a simple public Internet connection. InduSoft Web Studio Page 389