Licensing Upgrading the Current Hardkey License Note: These instructions only apply to upgrading a hardkey license for InduSoft Web Studio. To upgrade a license for CEView, see Installing or Upgrading a CEView License (Locally) on page 46 or Installing or Upgrading a CEView License (Remotely) on page 49. To upgrade your current hardkey license for InduSoft Web Studio: 1. Close all IWS development and runtime modules and then exit the application. 2. Make sure the hardkey is connected to the parallel port (LPT1) or USB interface on the computer where you installed InduSoft Web Studio. 3. Choose Start > All Programs > InduSoft Web Studio v7.0 > Register to launch the Protection Manager. 4.
When the Protection Manager dialog displays, select Hardkey in the Protection Type section and then click Check . Protection Manager: Select Hardkey • If you do not have a valid hardkey connected to the computer's parallel port (LPT1) or USB interface, the following error message displays: No Hardkey • If you do have a valid hardkey connected to the computer's parallel port (LPT1) or USB interface, the Hardkey Settings dialog displays, which contains the current license settings recorded on the hardkey. Checking the Hardkey Settings 5. Click the Change License button to open the Change License – Hardkey dialog: Change License Dialog 6.
Copy the code from the Site Code text box and send it to your software vendor. InduSoft Web Studio Page 41