omron — Enabling mobile access to your project

Creating a New Project The Mobile Access Settings dialog is displayed. 3. Select Enable Mobile Access . Mobile Access Settings dialog 4. In the LogOn Access Level text-box, type the user security level needed to log on to the Web application. For more information about security levels, see Security . 5. The Web application will show all active alarms to all logged-on users; there is currently no way to show or hide specific alarms. You can set the user security level needed to acknowledge alarms, however, and it may be different from the level needed to log on. In the Ack Access Level text-box, type the required level. 6.

To have the Web application show tag values, select Enable in the Process group-box. 7. For each tag you want to show: a. In the Tag Name column, type the name of tag or double-click to open the Object Finder and select the tag. b. In the Description column, type a description of the tag. This description is displayed only in the Web application and it may be different from the tag's existing description in the Project Tags datasheet. c. In the Write column, select the checkbox to make the tag writeable from the Web application. 8. In the Write Access Level text-box, type the user security level needed to write new tag values. This applies to all tags that are made writeable. 9.

You may choose to decrease the data refresh rate to improve application performance, especially in non-critical applications where alarms are uncommon and/or tag values do not change frequently. The refresh rates for Alarms and for Process information can be adjusted separately — in the corresponding Refresh Rate text-box, type the new rate in seconds. 10.Click OK where you are done. InduSoft Web Studio Page 91