Introduction If you still cannot connect via Microsoft ActiveSync, empty the device's \Temp directory and try again. 5. Install the rest of the EmbeddedView or CEView software on the target device: a) In Remote Management , click Install system files . When the installation is finished, the target device's updated status is displayed in the Status box. With EmbeddedView or CEView installed on the target device, you can now use it as a project runtime and/or thin client. Keep in mind that some run-time features are not supported on the Embedded target platform, which includes the EmbeddedView and CEView runtime editions.
Most of those unsupported features will be automatically disabled when you change your project's target platform from Windows to Embedded , but some will not be, and if you develop a project that uses any of those unsupported features and then try to run it in EmbeddedView or CEView, you might see unexpected behavior and possibly even serious errors during run time. You should always be aware of the differences between runtime editions as you develop your project. For more information, see About the InduSoft Web Studio software components on page 11.
Also, if you develop a project that uses the database gateway to connect to an external database (including Wonderware Historian or AVEVA Insight) and then intend to run that project in EmbeddedView or CEView, you might need to manually install the database gateway. For more information, see Manually install Studio Database Gateway . Page 25