Tutorial: Building a Simple Project 4. Click OK to close the Setup dialog, but leave the Remote Agent utility running on the remote station. 5. In the development application, click Connect on the Home tab of the ribbon. The Remote Management dialog is displayed. Remote Management dialog 6. Select the type of connection to the target (remote) station. This selection should match the selection you previously made in the Remote Agent utility on the remote station. 7. If you selected Host , type the host name or IP address of the remote station. 8. Click Connect .
If you successfully connect to the remote station, then information about that station is displayed in the Status and Platform boxes. 9. If the remote station is a Windows Embedded device, click Install system files . The system files are installed on the remote station. 10.Click the Project tab. 11.Click Download . The project files are downloaded to the remote station. 12.Click Run . Your IWS project is run on the remote station. Page 82