Troubleshooting en 13 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. ▶ Repairs to the appliance should only be carried out by trained specialist staff. ▶ Only use genuine spare parts when repairing the appliance. ▶ If the power cord of this appliance is damaged, it must be replaced by the manufacturer, the manufacturer's Customer Service or a similarly qualified person in order to prevent any risk.
Fault Cause and troubleshooting The appliance is not cooling, the displays and lighting are lit. Showroom mode is switched on. 1. Press and hold ( ) + ( ) + at the same time until and flash in the temperature dis- plays. 2. After a short time, check whether your appliance is cooling. The LED lighting does not work. Different causes are possible. ▶ Call customer service. The customer service number can be found in the enclosed customer service directory. or appears in the temperature display. The electronics have detected a fault. 1. Switch off the appliance. → Page 14 2. Disconnect the appliance from the mains.
Unplug the appliance from the mains or switch off the circuit breaker in the fuse box. 3. Reconnect the appliance after five minutes. 4. If the message still appears on the display, call cus- tomer service. The customer service number can be found in the enclosed customer service directory. appears in the tem- perature display. The button lock is switched on. ▶ Switch off the button lock. → Page 15 19