Home Connect en Settings that you send from the Home Connect app to the hob must be confirmed on the hob. a As soon as cooking settings are transmitted to a cooking zone, the display starts to flash, depending on the setting. 2. Press to confirm the setting. 3. To discard the setting, press any other touch field on the hob. 19.6 Activating automatic presence detection 1 2. Follow the instructions in the Home Connect app. Thanks to the automatic presence detection function, you no longer need to confirm parameters on the hob from your mobile device, provided you are near the hob. If you send settings to a cooking zone, you can confirm these directly from your mobile device.
Requirements Ў The hob is connected to the Wi-Fi and to the 19.3 Wi-Fi symbol The Wi-Fi indicator on the main screen changes ac- cording to the status and quality of the connection and the availability of the Home Connect server. status Description Lights up steadily at half brightness. No network connection saved. Flashes at full brightness. Network connection is be- ing established. Lights up steadily at full brightness. Home Connect app. Ў The Bluetooth is connected to the mobile device. Ў The user is near the hob. 1. Open the Home Connect app. 2. In order to set the automatic presence detection, fol- Network connection saved and Wi-Fi active. Flashes. Network settings are re- set.
Switched off. Network not active. low the instructions in the Home Connect app. 19.7 Software update Your appliance's software can be updated using the software update function, e.g. for the purposes of op- timisation, troubleshooting or security updates. To do this, you must be a registered Home Con- nect user, have installed the app on your mobile device and be connected to the Home Connect server. As soon as a software update is available, you will be informed via the Home Connect app and will be able to start the software update via the app. Once the update has been successfully downloaded, you can start in- stalling it via the Home Connect app if you are in your home network (Wi-Fi).
The Home Connect app informs you once installation is successful. Notes Ў The software update consists of two steps. – The first step is the download. – The second step is the installation on your appli- ance. Ў You can continue to use your appliance as normal while updates are downloading. Depending on your personal settings in the app, software updates can also be set to download automatically. Ў Installation takes a few minutes. You cannot use your appliance during installation. Ў We recommend that you install security updates as soon as possible. 19.4 Adding or removing a Wi-Fi home network The following overview shows how to add or remove a Wi-Fi home network.
Wi-Fi home network status Action No Wi-Fi home network stored. To add the Wi-Fi home network, briefly press . The Wi-Fi home network has now been saved. To pair another appliance, press and hold . The Wi-Fi home network has now been saved. To reset the Wi-Fi home network settings, press and hold . If flashes, press and hold again. 19.5 Changing settings via the Home Connect app You can use the Home Connect app to change the set- tings for the cooking zones and send them to the hob. Requirement: The hob is connected to the Wi-Fi and to the Home Connect app. 1. Select the setting in the Home Connect app and 19.8 Remote diagnostics send it to the hob.
Follow the instructions in the Home Connect app. Customer Service can use Remote Diagnostics to ac- cess your appliance if you contact them, have your ap- pliance connected to the Home Connect server and if Remote Diagnostics is available in the country in which you are using the appliance. 1 Available depending on software version. Further information on availability can be found on the website. 15