en Hob-based hood control Tip: For further information and details about the avail- ability of Remote Diagnostics in your country, please visit the service/support section of your local website: www.home-connect.com. Ў Security certificate of the Wi-Fi communication mod- ule (to ensure a secure data connection). Ў The current software and hardware version of your appliance. Ў Status of any previous reset to factory settings. 19.9 Data protection This initial registration prepares the Home Connect functions for use and is only required when you want to use the Home Connect functions for the first time. Note:
Please note that the Home Connect functions can only be utilised with the Home Connect app. In- formation on data protection can be retrieved in the Home Connect app. Please see the information on data protection. The first time your appliance is registered on a home network connected to the Internet, your appliance will transmit the following types of data to the Home Connect server (initial registration): Ў Unique appliance identification (consisting of appli- ance codes as well as the MAC address of the Wi-Fi communication module installed).
Hob-based hood control 20 Hob-based hood control If the hob and the extractor hood are Home Connect- compatible, connect the appliances in the Home Con- nect app. To do this, connect the two appliances to Home Connect and follow the instructions in the app. Notes Ў Using the controls on the extractor hood always takes priority. It is not possible to use the hob-based hood control during this time. Ў You can only connect to the extractor hood via the Home Connect app. Other connection routes are no longer supported. 1. Press . 2. 20.1 Controlling the extractor hood via the hob Note: Available depending on extractor hood model. a The fan is switched on.
In the basic settings for your hob, you can adjust the behaviour of your extractor hood depending on whether the hob or individual cooking zones are switched on or off. You can select other settings using the controls on the hob. Note: If you cannot find these settings for your hob, check the settings of the extractor hood in the Home Connect app to configure the connection. 3. Press to switch off the fan. Switching on automatic mode You can set automatic mode using the hob's control panel. Requirement: The function is assigned to Favourite button. 1. To switch on automatic mode, press . 2. To switch off automatic mode, press .
Connecting the fan ▶ In order to set the hood from the hob, you must first assign the hood function to Favourite button. → "Favourite button", Page 10 If you assign the hood function , you can choose between setting the fan, automatic mode or the hood lighting. Setting the hood lighting You can switch the hood light on and off using the hob's control panel. Requirement: The function is assigned to Favourite button. 1. To switch the lighting on, press . 2. To switch the lighting off, press again. Setting the fan Requirement: The function is assigned to Favourite button. 16 ou can se lect the following settings:
Fan off Fan setting 1 Fan setting 2 Fan setting 3 Intensive mode 1 Intensive mode 2 Automatic mode