PowerBoost en Ў To switch the display between the operating temper- ature PerfectFry Sensor and the programmed cook- ing time, press the selected temperature. Switching on Timer Requirement: Assign the function to . 1. Press . 2. Select the required time. a The time starts to elapse. a A signal tone sounds and the displays flash once Changing or switching off Switch-off timer 1. Select the cooking zone and then touch . 2. To switch off the function, change the cooking time or set it to . the time has elapsed. 10.2 Timer Changing or switching off the Timer 1. Press . 2. To switch off the function, change the cooking time Enables a clock to be activated.
This function operates independently of the cooking zones and other settings. It does not automatically switch off the cooking zones. or set it to . PowerBoost 11 PowerBoost The PowerBoost function enables you to heat up large quantities of water faster than when using . This function is available for all cooking zones, provided the other cooking zone on the same side is not in use. Otherwise, and flash on the display for the selected cooking zone. is then set automatically without activating the function. 1. Select the cooking zone. 2. Touch a The display lights up. 11.1 Switching on PowerBoost a The function is activated. 1. Select the cooking zone. 2. Touch .
a The display goes out and the cooking zone 11.2 Switching off PowerBoost switches back to power level a The function is switched off. Note: In certain circumstances, the appliance switches this function off to protect the electronic elements in- side the hob. PanBoost 12 PanBoost 1 You can use this function to heat up pans more quickly than with . Do not use the PowerBoost function with frying pans – this may damage the coating. You can activate the function via Home Connect or Fa- vourite button. This function is available for all cooking zones, provided the other cooking zone on the same side is not in use. Otherwise, and flash on the display for the selected cooking zone.
then switches on auto- matically. Ў Only use cold pans. Ў Use pans with a completely flat base. Do not use pans with a thin base. 12.2 Switching on PanBoost Requirement: Assign the function to . → "Favourite button", Page 10 . 1. Select the cooking zone. 2. Touch . a lights up. a The function is activated. 12.3 Switching off PanBoost 1. Select the cooking zone. 2. Select the power level. a goes out a The function is switched off. 12.1 Recommended applications Note: To avoid high temperatures, this function auto- matically switches itself off after 30 seconds. Ў Do not place a lid on the pan. Ў Never leave pans unattended when they are heating up. 1 Available depending on software version.
Further information on availability can be found on the website. 11