Bosch — 4.2 Installing and connecting the appliance

en Installation and connection 3.4 Sensors Installation and connection 4 Installation and con- The sensors adjust the programme sequence and strength in the auto- matic programmes depending on the level and type of soiling. The sensor has different sensitivity settings that can be changed in the basic settings. → "Changing basic settings", Page 40 nection Installation and connection To ensure proper operation, connect the appliance to the power and water supply correctly. Observe the spe- cified criteria and the installation in- structions. 4.1 Scope of supply Sensor set- ting Description After unpacking all parts, check for any damage in transit and complete- ness of the delivery.

If you have any complaints, contact the dealer who sold you the appli- ance or our Customer Service. Note: The appliance has been tested at the factory to check it is in working order. It is possible that water has left marks on the appliance. These marks will disappear after the first wash cycle. The delivery consists of the following: Ў Dishwasher Ў Operating instructions Ў Installation Instructions Ў Further information documents Ў Installation material Ў Salt filling aid funnel Ў Mains cable Ў Quick reference guide SE:00 Optimum setting for a mixed load and heavily soiled table- ware. Saves both en- ergy and water.

SE:01 Adjusts the pro- gramme strength for effective removal of food remnants even with low soiling levels. Energy and water consumption are adjusted accord- ingly. SE:02 Adjusts the pro- gramme strength for difficult conditions of use, e.g. stubborn dried-on food rem- nants. Recommen- ded setting when us- ing organic or ecolo- gical detergents con- taining low levels of active agents. En- ergy and water con- sumption are adjus- ted accordingly. 4.2 Installing and connecting You can position your built-under or integrable appliance in a fitted kit- chen between wooden and plastic walls.

If you subsequently install your dishwasher as a free-standing appli- ance, you must stop it from tipping over, e.g. by screwing it to the wall or the appliance 12