Installation and connection en 4.2 Installing and connecting the appliance 3. When doing so, check that the wastewater hose is not kinked, crushed or twisted. 4. Also check that there is no cover You can position your built-under or integrable appliance in a fitted kit- chen between wooden and plastic walls. If you subsequently install your dishwasher as a free-standing appli- ance, you must stop it from tipping over, e.g. by screwing it to the wall or installing it under a continuous work- top that is securely connected to ad- jacent cabinets. 1. Follow the safety instructions. in the drainage system preventing the wastewater from being dis- charged.
4.4 Drinking water connec- tion Connect your appliance to a drinking water connection. → Page 4 2. Follow the instructions for electrical Installing the drinking water connection Note Ў If you are replacing the appliance, connection. 3. Check the Scope of supply and the condition of the appliance. 4. Consult the installation instructions you must use a new water supply hose. for the installation dimensions re- quired. 5. Make the appliance level using the 1. Consult the installation instructions supplied for the steps required here. 2. Connect the appliance to the drink- height-adjustable feet. Make sure that the appliance is standing on the floor securely. 6.
Install the drainage connection. ing water connection using the en- closed parts. Observe the Technical data. 3. When doing so, check that the → Page 13 7. Install the drinking water connec- drinking water connection is not kinked, crushed or twisted. tion. → Page 13 8. Connect the appliance to the power supply. 4.5 Electrical connection 4.3 Drainage connection Connecting the appliance to the electricity supply Notes Ў Follow the Safety instructions Connect your appliance to drainage connection so dirty water is dis- charged via the wash cycle. → Page 4 . Ў Please note that the water safety Installing the drainage connection 1.
Consult the installation instructions system is only functional if there is a power supply. supplied for the steps required here. 2. Connect the wastewater hose to 1. Insert the non-heating appliance the outlet connection of the siphon using the enclosed parts. plug of the power cable into the appliance. 13