Delta ISPSoft — 20.3.1 Opening the PLC Link Table Editor Window

ISPSoft User Manual 20.3 Constructing a PLC Link A PLC Link is a network mechanism for data exchange performed through an RS-485 cable. If there are parameters which are set are downloaded to the PLC which functions as a master station, the system of the several nodes in an RS-485 network, users can create a mechanism for data exchange in the network. If the PLC will perform data exchange through special relays and special registers when the PLC runs. A PLC Link is a master/slave model. There is only one master station in an RS-485 network, and the other stations which are slave stations passively receive reading/writing commands from the master station.

The slave stations cannot exchange data. They have to exchange data through the master. 20.3.1 Opening the PLC Link Table Editor Window Before creating a PLC Link, users have to make sure that all the network setting is correct. Please use one of the methods described below.  Method 1 After the users select a network, they have to click Construct PLC Link on the Tools menu, or on the toolbar. 20-40