Chapter 20 Network Configuration and Data Exchange 20.4.9.2 Monitoring Status After the system enters a monitoring mode, the node which is monitored will be colored on the node list. Besides, the words and the pictures in the display area will indicate the execution status of the current Ether Link after the system enters a monitoring mode. 20.4.9.3 Disabling a Monitoring Function Disabling the function of monitoring a single node Method 1 Select a data demanding node, and then click on the toolbar, or Offline (Disconnect from a Single node) on the PLC menu. 20-77 Status Description Running/Stopping : The Ether Link constructed is executed. : The Ether Link is not executed.
Operating status : The Ether Link constructed is executed normally. : The Ether Link constructed is not executed normally. Start mode : Always Stop : Always Run : SM Flag Data block : The data exchange is being performed. : The performance of the data exchange stops.