Delta ISPSoft — 23.2.3 Sample Parameter Settings

Chapter 23 Wizard Tool 23.2.3 Sample Parameter Settings For sample setting page, the following chart shows that the items may differ based on different PLC types. The Sample Period is for setting sample time period. While Trigger Setting is for trigger position and condition settings. When trigger condition is reached, the host maintains a total of 200 data and reflected in the Waveform area. When selecting symbol variables or device in BOOL for Symbol/Device column, the compare condition will auto-select BOOL (see below). Or choose ON, OFF, rising edge-triggered, falling edge-triggered, rising or falling edge-triggered from the drop-down list.

When the symbol or device fulfills the setting condition, the trigger will show on the data tracer. When choosing Word, DWord or Real as symbol variables or devices for Symbol/Device column, the system auto-selects Word (see below) or select DWord or Real from the drop-down list and select conditions by choosing >, of the setting. When the setting symbol or device fulfills the condition, the trigger is shown on the data tracer. 23-17 Name Desc AS AHxxEMC AH5x1 System Cycle Time Host scan time V V V ECAT Cycle Time ECAT scan cycle Max. 1000 User-defined Time User-defined time Max.1000 Max.1000 Trigger Position Triggering position Max. 200 Max. 10000 Max.

200 Symbol/Device Triggering device/ symbol Supports Global Symbol Supports Global Symbol, Local Symbol, Axis Symbol, ECAT Supports Global Symbol Triggered Points Max. value for trigger position Max. 10000