Delta ISPSoft — 23.3.3 Sample Parameter Settings

ISPSoft User Manual 23.3.3 Sample Parameter Settings can be categorized into Periodical Sampling and Triggered Sampling . When using Periodical Sampling , In sample parameter page, the Sample Points are used to setup the number of samples; Sampling Method users need to setup cycle time once every week; when using Triggered Sampling, users need to setup triggered device. When triggered device is ON, the sampling takes place, however, the triggered device is auto-switched to OFF once sampling is complete. When the number of sample points has reached, users can select either Stop Recording or Continue Recording (Replace old data).

To add sample symbols, click button in Symbol Name and a pop-up Add Sample Source window appears. Then click the button to select the added symbol variables or type the device name in the window and click Add to the sample source list (see below). 23-28 Icon Name Function Write to Memory Card Write the data recorded in the PLC to the memory card.