Chapter 23 Wizard Tool 23.4 High Speed Counter 23.4.1 About High Speed Counter The high speed counter tool enables users to select the register number of the corresponding high speed counter based on the type of the high speed counter, format of the value to be counted and input point number so that DCNT instruction can be set quickly. 23.4.2 Using High Speed Counter Double-click DCNT instruction in the ladder diagram to open the High Speed Counter Setting window as follows. Firstly, select the type of the high speed counter such as Hardware-1 Phase 1 Input , Hardware 1 Phase 2 Input and so on. Then select Input Point or Counter device (see below).
Set the arrival value with options including Decimal, Hex or D device from the drop-down menu and input the value or D device number on the right. 23-37