ISPSoft User Manual A.1 Installing the USB Driver for an AS Series CPU module A.1.1 Installing the USB Driver in Windows XP with SP3 The installation of the USB driver for a PLC on Windows XP is introduced below. If users want to install the USB driver for a PLC on another operating system, they have to refer to the instructions in the operating system for more information about the installation of new hardware. (1) Make sure that the PLC is supplied with power normally. Connect the PLC to a USB port on the computer with a USB cable. Select the No, not this time option button in the Found New Hardware Wizard window, and then click Next .
(2) The name of the USB device detected is displayed in the window. The device name shown in the figure below is the name of an AH500 series CPU module. Different models have different names. Please select the Install from a lost or specific location (Advanced) option button. A-2