Chapter 3 PLC System Configuration & Settings Using the Last Closed Position When Reopen the Form If this option is selected, the size and position of the form will be memorized when the software is turned off, or the window’s size and position will be set as default the next time you turn on the software. Theme Style The default setting would be the light color style, which can also be changed to the dark color style. Display Mode to be used for laptops or devices with a smaller screen; a settings window will prompt for users to According to the screen size, there are two options for the display mode.
One is 13” 16:9 size suggested configure parameters of devices and modules, please refer to the content of HWCONFIG 3.0 operation mode . Another option is 24” 16:9 size supporting new operation mode for HWCONFIG 4.0 to provide users a convenient way of viewing more information in a single screen. * Settings and options on the Language tab. Language The display language can be modified in standalone version. When finish modifying, the change will be effective after a reboot. The display language in HWCONFIG opened by ISPSoft would be same as the one used in ISPSoft. If intend to change the language setting, you must turn off HWCONFIG and modify in ISPSoft, then reopen HWCONFIG.
PO List Display the list of hardware and accessaries configured in the project. Click “PO List” on HWCONFIG tool bar under the Tool tab or use shortcut key Ctrl+F6. 3-37