ISPSoft User Manual 3.1.3.13 Module State and Diagnosis To check the module state and diagnosis, first you need to be in the online mode. Right-click the module that you want to check its module state and diagnosis and then a context menu appears. After you click Diagnosis, you can see a table with three tabs. On the Diagnosis tab, you can see the Current Error Log table. When the error is cleared, you can use to clear the error log stored in the module and the module state can be restored to normal. Use to update the module state. 3.1.3.14 Change Module State in Online Mode You can change the module state in online mode.
Before changing the module state, make sure no personnel or system will be affected. Change the module operation state Right-click the PLC CPU to see the context menu and click Run for the PLC CPU and module to start running (RUN LED ON) or click Stop for the PLC CPU and module to stop running. 3-60