Chapter 3 PLC System Configuration & Settings IO-Link usage example: Step 1. Add AS04SIL-A module Go to “Network Module” under “Product List” on the right side of the page, then add “AS04SIL-A” module to the hardware configuration area as below shown. After click and choose the module, the “Device Information” and relating settings of module would be shown on the Hardware Configuration tab in the below Edit Area. Step 2. Add the IO-Link device There’re three ways to add the IO-Link device. Method 1_Scan all the module configuration Make sure all the hardware devices are configured, then click “Scan” under the “Communication” in the toolbar.
Click “Scan” after the Scan window appears, then click “Yes” in the confirm window to confirm the scan action. Continue to click “Yes” to start scanning. 3-69