ISPSoft User Manual 3.1.4.10 Ethernet Port Advance Setting – NTP Users can use NTP table to enable the CPU module and adjust time via NTP server. Relevant parameters are set here. For more information on NTP, refer to related literature and manuals. Select NTP Client Function Enable checkbox to enable the function. Set the address of NTP server and cycle of constant update. Take the figure above as an example. The CPU module connects to the NTP server every 30 minutes. Set up the time zone for the daylight saving time area. 3.1.4.11 Ethernet Port Advance Setting – Email Email table is for users to set the email-related functions.
The email will be sent to the set email address after the email function is enabled. Total four groups of email sending conditions and four groups of email addresses can be set. 3-96