ISPSoft User Manual AH16AM10N-5A Module (slot 0) This is a 16-point digital input module. The system assigns X0.0~X0.15 that is 1 WORD device in total to store and input module status regarding all points. AH16AN01T-5A Module (slot 1) This is a 16-point digital output module. The system assigns Y0.0~Y0.15 that is 1 WORD device in total to store and output module status regarding all points. AH04AD-5A Module (slot 2) This is a 4-channel analog input module. The system assigns D0~D7 which is 8 WORD in total and the conversion of external analog input signal is stored in D0~D7. AH16AP11T-5A Module (slot 3) This is a 8-point digital input/output module.
Since the assigned device requires at least 1 word unit, the system assigns X1.0~X1.15 (actual range of use: X1.0 ~ X1.7) device to store and input module status regarding all points; in addition, Y1.0 ~ Y1.15 (actual range of use: Y1.0 ~ Y1.7) is assigned to store and output module status regarding all points. AH20MC-5A Module (slot 4) This is a motion control module, but since the module does not require constant data updates, therefore, the system does not assign device address. To obtain the corresponding functions of the assigned device address, double-click on the graphic module or the row on Information to open the Parameter Setting window for the module.
information about the module on the information list to open the Parameter Setting window. If users want to know functions to which devices assigned correspond, they can double-click the module or the *. When users double-clicks the row on Information box, please click on either the Slot No., Label, or Description cell to avoid columns for edit. Click the Normal Exchange Area tab in the Parameter Setting window to see a list regarding device address 3-122