Chapter 3 PLC System Configuration & Settings 3.2.2.5 Replace Module Users can take the following steps to modify AH series modules in System Configuration area: (1) Select and right-click an AH series module for modification in System Configuration area or from Information . (CPU and power module cannot be modified.) (2) Choose Replace on the quick menu and two ways are shown in the following. Same Type Replace only the selected module to be the same type module. The new module Input/Output Device Range will be the same, while other parameters may return to system defaults if it is not corresponding. All Replace selected module to be any type of module.
The result is similar to deleting the original module by adding a new one, so the new module Input/Output Device Range will be re-configured and other parameter settings will also return to system defaults. (3) When selecting on methods to Replace, the Module Selection window appears with modules available for the selected Replace method; when the replaced module is decided, you can double-click on that module. 3-129