ISPSoft User Manual 3.3 Parameter Settings for AH500 Series PLC 3.3.1 Open the PLC CPU Parameter Setting Page When HWCONFIG is enabled, double-click the CPU graphic in System Configuration area to open the PLC CPU Parameter Setting page. In addition, the setting paged for parameters differ based on different PLC model types. effects of parameter settings to the PLC CPU as well as the whole system, in order to avoid any Before setting the PLC CPU parameters, please check on user manuals for all PLC types and the system or personnel risks. *. Download the parameter once settings are complete, please refer to section 3.8.4 for ways to download.
The setting window contains many tabs based on different parameters. Users can use the main category tabs near the top of the window, while each sub-category tab refers to a parameter setting is shown near the bottom of the main category page. 3-160