Chapter 3 PLC System Configuration & Settings 3.4.2.3 Option- Ethernet Setting The users can set the communication parameters for the Ethernet port in the CPU module in this page. They can refer to section 2.4.7 for more information about connecting to a CPU module through the Ethernet port on the CPU module, and refer to other related documents or manuals for more information about Ethernet. Users can set an IP addressing mode for the CPU module. If users select Static in the IP Addressing Mode drop-down list box, they can specify an IP address. If Dynamic is selected in the IP Addressing Mode drop-down list box, an IP address is assigned dynamically. 3-203