ISPSoft User Manual 3.4.3.2 Data Exchange - Ethernet On the page of tab Data Exchange - Ethernet , double click the data exchange table to be set so as to open the Item window as below. The settings are almost same as that for Data Exchange - COM2 except the target slave model option in Device Type which contains Delta PLC and standard MODBUS TCP equipment as well as IP address for typing the IP of remote slaves. For other settings, refer to the content of Data Exchange - COM2 . Select the check box of Apply to all to the right side of The Shortest Update Cycle and Connection Timeout and then click OK .
The settings for The Shortest Update Cycle and Connection Timeout will be written to other data tables on the tab Data Exchange- Ethernet. Users could set data exchange tables separately without selecting the check box of Apply to all . 3-210