Chapter 3 PLC System Configuration & Settings depend on the firmware version of the module which is set. The descriptions of the columns in the table are as follows. If the color of a table cell is grayed out, the cell cannot be edited. Parameter name The parameter names or descriptions are shown in this column. Value Users can set initial values in this column. When the parameters in HWCONFIG are downloaded, the initial values set are written into the module. Users may type initial values for some parameter types, or select initial values on a drop-down menu for other parameter types in the Value column.
Please refer to the instructions of the module for more information about the range of values which can be set, and the processing mechanism after the initial values are downloaded. Unit, Default, Minimum and Maximum Users can refer to the unit, default, the minimum and maximum of the parameters in the following window when setting them. 3-237