ISPSoft User Manual 3.8.6.4 Monitoring Table If the hardware configuration is in the online mode, users can view the values in the data registers in the Monitor Table window after they click Monitor Table on the Option menu. Users can not add any item to the Monitor Table window. After users select the checkboxes in the Monitor cells for parameters, the data registers assigned to the parameters will be listed in the Monitor Table window. Please refer to section 3.7.2 for more information. *. If the setting in the Monitor column in the Parameter Setting window is changed, the setting can take effect without having to be downloaded to the CPU module.
Users can view the values in the data registers in the Monitor Table window, but they can not change the values. If users want to change the values in the data registers in the Monitor Table window, they can follow the instructions in section 3.7.1. Besides, after users click the Radix cell for a data register, they can select a method of representing the value in the data register on the drop-down list. 3-254