ISPSoft User Manual 4.5.5 Basic Editing - Connecting a Contact in Parallel (1) Click on the toolbar, and then move the mouse cursor to the input contact in network 2. The mouse cursor will appear as a contact. Move the mouse cursor to the button of the input contact in network 2. After the mouse cursor appears as , users can click the left mouse button. A contact will be connected to the input contact in network 2 in parallel. (2) Write the program in network 2 shown below in the way described above. Additional remark After users select a group of contacts, they can connect a contact to the group of contacts in the way described above. 4-20