Chapter 4 Quick Start 4.6 Testing and Debugging a Program 4.6.1 Creating a Connection Before a program and parameters are downloaded to a PLC or monitored online, ISPSoft must be connected to the PLC. In this example, ISPSoft is connected to AHCPU530-EN host CPU through a USB cable. and configuration parameters. For those already connected to the host, please skip to section 4.6.2 on details regarding download program (1) Install the modules on the main backplane in accordance with the hardware configuration in HWCONFIG. Make sure that the wiring is correct, and then power the CPU module. (2) Connect the CPU module to the computer through a USB cable.
If the USB driver for the AH500 series CPU module has been installed on the computer, Delta PLC will appear in the Device Manager Window, and a port number will be assigned to Delta PLC . Please refer to appendix A for more information about installing a USB driver. (3) Make sure that COMMGR is started, and the icon representing COMMGR is displayed on the system tray. If the icon representing COMMGR is not displayed on the system tray, users can start COMMGR by clicking the shortcut on the Start menu ( Start > Programs > Delta Industrial Automation > Communication > COMMGR) . 4-27