Chapter 5 POU and Task When equipment assembly is complete, but test instrument are not, users can disable both POUs- test A and test B. Then, users can skip the two station to focus on other parts for adjusting and testing. Feeding Test A Test B Positioning Discharging To set POU in active state, click Active in the Create Program window. If Active is not selected, the POU function is closed. A different icon is shown in the Project section to represent POU function closed. *1. Users can disable a POU by removing it from the original task section.
However, if the users want to execute the POU later, they have to assign the POU to the original task again, and rearrange the POUs in the task section. As a result, it is more convenient for the users to disable the POU temporarily by unselecting the Active box in the window. *2. A POU can be enabled not only by selecting the Active box, but also from Task Manager. Please refer to section 5.5.3 for more information. 5.4.3 Delete and Copy POU To delete a POU, right click on the selected item and click Delete . 5-21