Chapter 5 POU and Task After a task in the Task Type section is selected, the description of the task will be displayed in the Task Description section. Users can set the condition of executing the task in the Task Description section. The tasks provided by projects are related to the functions of selected PLCs. Thus, each task property content is different, but basic settings are the same. The content in Task Description also differs depending on the types of PLC. For instance, when using AH560 redundant system series, specific option like Synchronize Redundancy Data after Execution appears. For more information regarding the function, please refer to related product user manual.
The setting of the properties of tasks can be illustrated with some simple examples. Users can refer to the examples and the operation manual for a PLC for more information about setting the properties of tasks. Example 1: To set the interrupt task property of SV series, please check on the interrupt indicators provided by SV series. The following table demonstrates interrupt indicators in SV series from the DVP-PLC Application Manual (Programming). 5-31