ISPSoft User Manual 9.1.2.2 DVPxxMC/AS5xx – Create Axis & Basic Settings Right-click Axis in the Project area and then click New on the context menu. The New Axis window will appear. Type an axis variable name under Axis Variable and click OK button in the following window to add the node item under Axis in the project management area. Currently, the DVPxxMC and AS5xx series provide maximum number of 32 axes and supports up to 24 real axes. For settings on real axis and virtual axis, please refer to section 9.2.1.2. Make sure that the axis variable name should not be the same as other global symbol names or local symbol names.
On the right side of the Axis items is Node ID:112 , it is the station number of motion controller, default setting is 112 and cannot be changed. The Axis name is shown next to the Node item and contains two sub-items- Axis Parameter and Monitor &Test Run. Please view the following chapters for more details. 9-6