ISPSoft User Manual 17.1 ISPSoft Editing Tools and Auxiliary Functions 17.1.1 Modify PLC Types In ISPSoft, users can change PLC types, most series offers two-way but some series only offer one-way modification. For example, DVP Series can change to AS Series, but not vice versa; AH5xo Series can change to AH560 Series but not vice versa. Please refer to the following table. *1. DVP-ES3 Series cannot change other DVP Series, but other DVP Series can change to DVP-ES3 Series. The modified PLC types will change the content of current project. Thus, the project should be saved first before modify the PLC.
Since PLC functions, device range or support command can vary before or after the modification, please make sure the original program, parameter setting, hardware and network planning is functioning properly. If users want to change the PLC type, they can click Change PLC Type… on the Tools menu, select a PLC type in the Change PLC Type window, and click OK . 17-2 Purpose AS AH5x0 AH5x1 AH560 AHxxEMC DVP AS5xx Source DVPxxMC AS V V V V V Support ES3 AH5x0 V V V V AH5x1 V V V AH560 V V V AHxxEMC V DVP V V（*1） AS5xx DVPxxMC V