ISPSoft User Manual For a quick way to go to the specific device range, right-click on the Device Comment area to see the context menu and select “Jump to”. After that a Jump to window will show up. Type the device name and press OK. The table will display the required device range. Before typing the device name, you will need to make sure the device name you are going to type exists in the table. You can also use Jump to function in the Used Device tab. The devices used in the program and the information about the devices are listed in the Used Device page. The tabs below this page indicate device types.
Besides, after the users double-click a row on the Used Device page, the system will lead the users to the corresponding device position of that row. 17-40