ISPSoft User Manual affect the system, or cause damage to the system and staff. Before the values are written into the registers, users have to make sure that the operation does not The values in the Edit File Register Memory window can be saved with the project. If the present window is the Edit File Register Memory window, the values in the Edit Register Memory window will be saved as a wft file whose primary filename is the project name in the folder in which the project (*.isp) is saved after the users click Save on the File menu or the toolbar.
If the users want to open the Edit File Register Memory window in the project again, the system will open the wft file in the folder in which the project (*.isp) is saved. If no wft is in the folder in which the project is saved, the values in the Edit File Register Memory window will be 0. Besides, the users can save the values in the Edit File Register Memory window as a wft file in another folder after they click Save As on the File menu. If the users want to open the wft file which was saved previously, they can click Open on the Fil e menu or the toolbar. 17-60