Chapter 2 Starting and Setting ISPSoft 2.4.3.7 Communication Parameter Setting - AH5x0 & AH5x1 Simulator (1) Type the Driver Name . To add special marks, only ‘_’ can be used. (2) For Connection Setup , select AH5x0 Simulator or AH5x1 Simulator from the drop-down list for Type . (3) Input assigned Port Number . (4) To setup parameters concerning responding time. For Connect Retries, users need to setup the number of retry once connection error occurs, while for Connection Time-Out setting, the parameter concerns the time interval between retries. 2.4.3.8 Communication Parameter Setting - AS Simulator (1) Type the Driver Name . To add special marks, only ‘_’ can be used.
(2) For Connection Setup , select AS200 Simulator or AS300 Simulator from the drop-down list for Type . (3) Input assigned Port Number . (4) To setup parameters concerning responding time. For Connect Retries, users need to setup the number of retry once connection error occurs, while for Connection Time-Out setting, the parameter concerns the time interval between retries. Additional remark (a) To use simulator functions, we suggest using ISPSoft V3.05 or later versions. (b) When using simulators, users need to be aware that they do not support all functions and commands. 2-51