ISPSoft User Manual If users want to monitor the devices in a DVP series PLC through DVPDU-01, they can select the TS-01 mode in DVPDU-01. If users want to read data from a DVP series PLC through DVPDU-01, or write data into a DVP series PLC through DVPDU-01, they can select the TC-01 mode in DVPDU-01. If users want to read data from a DVP series PLC in which a PLC password is set through DVPDU-01, or write data into a DVP series PLC in PLC password in DVPDU-01.
After the system makes sure that the TC-01 password key set in DVPDU-01 is which a PLC password is set through DVPDU-01, they can set a TC-01 password key which is the same as the the same as the PLC password, the data will be read from the DVP series PLC, or the data will be written into the DVP series PLC. Besides, when users read data from a DVP series PLC in which no PLC password is set through DVPDU-01, or write data into a DVP series PLC in which no PLC password is set through DVPDU-01, the system sets a PLC password in the DVP series PLC. The PLC password set in the DVP series PLC is the same as the TC-01 password key set in DVPDU-01.
The setting of a TC-01 password key and the unlocking of a TC-01 password key are described below. Users have to make sure that DVPDU-01 is on standby before they set a TC-01 password. If an error occurs in DVPDU-01, or DVPDU-01 is in a process, the users have to eliminate the error, or complete the process. Please refer to DVPDU-01 User Manual for more information. (1) After the users press ESC on DVPDU-01 for three seconds, the password setting screen will appear. (2) Set a TC-01 password key by means of ISPSoft, or unlock the TC-01 password key by means of ISPSoft.
Setting a TC-01 password key After the users click the Tools menu, point to DU01 Setting , and click Set TC-01 Password Key , the Set TC-01 Password Key window will appear. The users have to type the same password in the two boxes in the window. After the setting of a TC-01 password key is complete, the users can click OK in the window. 19-14