ISPSoft User Manual *. Please refer to related books or technical documents for more information about RS-485 and Ethernet. 20.1.3 Communication Setting in NWCONFIG NWCONFIG is used to configure a network. When users configure a network, they have to download parameters to the nodes in the network, upload parameters from the nodes in the network, or monitor nodes in the network. The nodes in the networks created in NWCONFIG may include a device which is not the device for which the ISPSoft project is created, and therefore users have to set the communication parameters in the device.
In order to help people select appropriate parameters, the communication mechanism in NWCONFIG is introduced before communication setting is described. 20.1.3.1 Connection Mechanism in NWCONFIG upload parameters from a single node or multiple nodes, and monitor a single node or multiple nodes. Before In the networks created in NWCONFIG, users can download parameters to a single node or multiple nodes, users download parameters to a single node or multiple nodes, upload parameters from a single node or multiple nodes, or monitor a single node or multiple nodes, they have to select appropriate parameters.
Single node Users can download parameters to a single device, upload parameters from a single device, and monitor a single device. Before users download parameters to a single device, upload parameters from a single device, or monitor a single device, they have to make sure that the device specified is the same as the device which is actually connected to the computer. 20-6